Hello,
We are looking to buy butter blister packing machine, I am sending you details of our requirement:
Technical specifications of Fully Automatic Form Fill Seal Machine (Thermoforming) for 8gm to 15 gm Tub. Cap. 18,000 to 20,000 Portions/hr. (minimum) with Semi Automatic Cartoning Machine of Matching Cap.
MAKE : BENHILL /NEW PACK/HASSIAN/REPUTED INTERNATIONAL MAKE
PRODUCT : Table Butter
Output : 18,000 portions/hr (minimum) to 20,000 portions/hr
Pack size : 8 gm – 15 gm
Packing MaterialCup : PS/HIPS-PE/HIPE-EVOH-PE/PVC/PET/Barrier Materials.
Lids : pre-printed laquered aluminium foil /plastic foil.
Machinery Description:-
i. Storing station : Housing and feeding of packing material to be thermoformed & required auto controls to work continuously.
ii. Heating station : For heating of material, surface to be thermoformed to obtain perfect drawing. The operation should be PLC controlled with all relevant automation to minimize loss of packing material
iii. Forming station : For forming of tub of required shape with all relevant automation including coding.
iv. Filling/dosing station : Automatic feed control with All S.S AISI316 material and gasket material FDA approved, Micrometric adjustment of the weight/volume of feed, automatic selecting and positioning valves during CIP phase. Accuracy
required + 1%.
v. Storing housing & feeding station of lid material: U.V. lamp for lid sterilization & automatic & slicing / placement of lid on cup.
vi. Contact sealing section : Temperature thermo regulation from control panel over heating.
vii. Saving system sealing : Anticorrosion heating head for sealing.
viii. Trimming station : To maintain standard configuration being discharged through belt conveyor.
ix. Take off station & scrap winding system: Correct positioning of the finished containers coming out of trimming station and pulling system to coil off the scrap from the machine & its evacuation along with safety features.
x. Driving system Protection : The motion parts must have transparent protections for easy inspection and safety micro switches.
xi. PLC : i) Touch screen :in S.S. AISI304 panel.
ii) Electrical /electronic parts of reputed international brands.
iii) Suitably placed for easy operation.
iv) Both manual and auto mode / diagnostic menu mode.
v) Pest / water proof.
xiii. High clean system should be inbuilt.
xiv. All relevant automation :-
a. No cup no fill
b. No fill no seal
c. No product no fill
d. No fill no cut
e. Alarm in case of no packing material.
f. Alarm in case of less compressed Air
g. Printing centering registration system for lid.
h. Menu in English.
i. Printing of expiry date, date of mfg, MRP etc.
j. Automatic index regulation etc.
xv. Information to be given by party :-
a. Cycle minute : _______
b. Cups / cycle : ________
c. Forming area : _______
d. Air pressure : ________
e. Air consuming : _______
f. Mould cooling water : _
g. Cooling water temp : __
h. Installed load : _______
i. Dimensions : _________
Length : __________
Width : __________
Height : __________
j. Model of machine : ____
k. Any other information : _
TECHNICAL SPECIFICATIONS FOR SEMI AUTOMATIC PICK & PLACE
CARTOONING MACHINE :
It is must be of matching capacity.
It must be suitable to pack cups into carton boxes.
Complete structure must be of stainless steel.
The system should take cups from the exit conveyor of thermo forming (Formfill-seal) machine.
PLC operated machine.
Conveyor belt for the transport of filled boxes.
Provision for selecting of number of layers for flexibility in pack size.
No of cups desired per layer is 6X4=24 cups
No of layers : up to 10
The machine should be easy to operate and compatible with FORM –FILL –
SEAL machine Table Butter chiplet packing machine.
Size : Height : _____
Width : ____
Height : ____
Weight : ____
Other service :
Required : ___ (to be mentioned by party)
Model No:____
Any Other information:__
Other :-
i. The operation & maintenance training will be given by supplier /
Manufacturer.
ii. The operator manual / guidelines must be provided (Both soft/hard copy)
iii. The party will help in souring packing material & its designing.
iv. The machine must be supplied with 2 years back up spares.
v. The supplier will be responsible for post supply maintenance / back up of
spares.
vi. All parts coming contact with product must be of S.S. AISI304. All others
parts must be epoxy painted.
vii. The tools kit for repair maintenance of machine must be supplied.