Show

Blister Machine FAQ

The Differences Between the Blister Machine DPP260Ki and DPP260K2

The main difference between the Blister Machine DPP260Ki and DPP260K2 are:
The Blister Machine DPP260Ki accommodates two forming material reel. One of the reel’s diameter can reach up to 600mm, if it equips the waste material trimming cutter(optional), it could allow production runs of approximately 90 minutes, therefore, reducing the material replacement frequency.
The Blister Machine DPP260K2 accommodates only one forming material reel.
The Blister Machine DPP260Ki is equipped with an integrated forming material splicer to enhance efficiency during material replacement.
The Blister Machine DPP260K2 is not equipped with this mechanism.
The Blister Machine DPP260Ki adopts aluminium control enclosure that made in Germany and color Touch Screen User Interface.
The Blister Machine DPP260K2 adopts self-made Control enclosure and black-and-white Touch Screen.
The Blister Machine DPP260Ki add a perforation station, to separate the perforation from the embossing station, to make perforation and embossing more clear.
In the Blister Machine DPP260K2, the perforation and embossing remain in one station.
 
In Blister Machine DPP260Ki, the lidding material loader adopts a automatic fast lock mechanism, enabling replacement of lidding material easily within about 10 seconds.
The Blister Machine DPP260K2’s film, lidding material loader adopt manual locking mechanism.
The Blister Machine DPP260Ki adopts a waste material chopping mechanism, which can cut the waste grind into small pieces. It improves efficiency significantly compared with the wind-up mechanism that needs to stop the machine frequently, for winding and removing the waste grind.
The Blister Machine DPP260K2 adopts waste grid wind-up mechanism.
 
In the Blister Machine DPP260Ki, all the main parts are made of premium stainless steel and alu-alloy material, and machined by advanced high precision CNC tooling machines.
In the Blister Machine DPP260K2, the main parts are made of ordinary low-carbon steel.
 
 The Blister Machine DPP260Ki adopts flange type casters, composed of an aluminum die-casting foot and a wheel of high strength engineering plastic. The advantage of this caster is that it can be adjusted to become a foot or wheel, allowing for ease of movement, height adjustment and placement of the machine. and a revolution of 360∑.
The Blister Machine DPP260K2 adopts self-made machine foot.
 Jornen Machinery Co., Ltd.
         23-4-2014